20+ Years Experience
Specialist Intumescent Paint Spraying
Enquire Today For A Free No Obligation Quote
“`html
Looking for professional intumescent painting contractors in Rawmarsh? We apply specialist intumescent coatings and passive fire protection systems to structural steelwork across commercial, industrial and construction projects.
Our experienced contractors can prepare, prime and coat structural steel to achieve the specified fire protection requirements for your project.
Intumescent Painting Contractors are proud to have been voted the Top 10 Fire Protection Painting Installers in the United Kingdom when up against all of the top-rated FeRFA companies.
We work with contractors, developers, building owners, facilities managers and commercial clients throughout Rawmarsh S62 6 and Yorkshire and the Humber.
Our intumescent painting services include:
Have drawings, steel schedules or a fire protection specification? Send them to our team for review and a competitive quotation.
We provide specialist intumescent coating services for commercial, industrial and construction projects throughout Rawmarsh.
Our intumescent paint installers in Rawmarsh are accredited by IPAF, FIRAS, CHAS, PASMA and CITB.
Our team can carry out the coating process from substrate preparation through to final inspection, depending on the requirements of the project.
Services can include:
Our installers have experience working with structural steel and specialist fire protection coatings because correct preparation, application rates and film thickness are critical to the performance of an intumescent system.
Where relevant to your project, details of available accreditations, qualifications and previous projects can be provided on request.
Contact us today to discuss your structural fire protection requirements.
Intumescent coating in Rawmarsh can cost approximately £4 to £12+ per m², although the actual project price can vary substantially depending on the required fire rating, coating thickness, steel profile and site conditions.
Square metre rates alone can be misleading because structural steel protection is often calculated around the steel section and required dry film thickness.
Factors affecting the cost include:
For an accurate quotation, send us your drawings, steel schedule, required fire rating and project location.
Structural steel can lose strength as its temperature increases during a fire.
Intumescent coatings help delay temperature rise because the coating expands under heat and forms an insulating char around the steel.
Depending on the specified system, intumescent protection can be designed around different required fire resistance periods.
Applications can include:
If your project specification requires fire protection to structural steel in Rawmarsh, contact us with the steel schedule and required resistance period for a quotation.
We work on new-build and refurbishment projects requiring passive fire protection to structural steel.
Our team can coordinate intumescent coating works with the wider construction programme and apply the specified coating system once the steel substrate is ready.
The process can include:
Contact us with project drawings or tender documentation if you require an intumescent coating contractor for an upcoming development.
Existing intumescent coatings can require repair after damage, alteration or exposure during construction or building works.
We can assess damaged areas and recommend remedial works based on the existing system and condition of the substrate.
Repairs may include:
Compatibility is important because primers, intumescent layers and topcoats must form an appropriate coating system.
Send us photographs and available product information if you need an intumescent coating repaired in Rawmarsh.
Different intumescent systems are available for different substrates, environmental conditions and fire protection requirements.
The correct product should be selected from the project specification rather than solely on price.
Water-based intumescent coatings are widely used for structural steel in suitable internal environments.
They can provide an efficient option for projects where exposure conditions allow the use of a water-based system.
Benefits can include:
Product suitability depends on the environment and required specification.
Contact us to discuss water-based intumescent coating prices in Rawmarsh.
Solvent-based intumescent coatings can suit steelwork where environmental exposure or project conditions require a more robust coating system.
They may be specified for semi-exposed or more demanding environments, subject to manufacturer approval and the complete coating system.
Applications can include:
We can review your specification and provide prices for suitable solvent-based systems.
Epoxy intumescent coatings are commonly considered for demanding environments where enhanced durability and fire protection are required.
They can be specified for industrial, offshore, petrochemical and other high-risk environments depending on the product and project requirements.
Epoxy systems typically involve specialist preparation and application requirements.
Send us the project specification if you require epoxy intumescent coating prices.
Thin-film intumescent coatings are commonly used for structural steel in commercial buildings.
The coating is applied to a calculated dry film thickness based on the steel section, section factor and required fire resistance period.
A complete system can comprise:
Correct film thickness matters because the required protection depends on the tested and specified coating build.
Contact us if you need a thin-film intumescent coating contractor in Rawmarsh.
Professional intumescent coating requires more than simply applying fire-resistant paint.
The system needs to be prepared and applied according to the manufacturer’s specification.
A typical process includes:
The substrate is inspected and prepared to remove contaminants, corrosion or unsuitable coatings where required.
A compatible primer may be applied according to the selected intumescent system.
The coating is normally applied by airless spray on larger projects, although brush or roller application may be appropriate for certain areas and remedial work.
Wet film thickness can be monitored during application and dry film thickness checked once the coating has cured.
A compatible topcoat can be applied where required for appearance, durability or environmental protection.
The completed system can be inspected against the project requirements before handover.
Need a contractor to apply a specified system? Send us your coating schedule for a quotation.
The required fire resistance period is normally established by the project’s fire strategy, building design or specification.
Depending on the building and structural requirements, protection may be specified for periods such as:
The required dry film thickness is not automatically the same for every steel member because section size, section factor and product performance affect the amount of coating required.
We can work from your steel schedule and specification to price the required coating application.
Correct dry film thickness is an important part of intumescent coating installation.
Too little coating may not provide the specified protection, while unnecessary over-application can increase material use and project costs.
Thickness inspections can include:
If you require an existing intumescent system inspected or remedial thickness applied, contact us for a quotation.
We provide intumescent fireproofing services for structural steel across Rawmarsh and surrounding areas.
Our contractors work on both new and existing buildings requiring passive fire protection.
Typical projects include:
We can work directly with the main contractor, specialist subcontractor, developer, architect or building owner.
If you have an upcoming project, send us the specification and programme so we can provide a price.
Intumescent coatings provide passive fire protection for structural steel while maintaining a clean, professional finish.
Key benefits include:
The benefits depend on using the correct tested coating system because steel section, section factor, required fire resistance and environmental conditions determine the specification.
Need intumescent coating for structural steel in Rawmarsh? Send us your drawings, steel schedule or fire protection specification for a quotation.
Intumescent paint is a specialist passive fire protection coating that expands when exposed to high temperatures.
The reaction creates an insulating char between the heat source and the substrate.
When applied to structural steel as part of a tested system, this insulating layer slows the rate at which the steel heats during a fire.
The required product and coating thickness depend on the steel member and specified fire resistance period.
If your project requires intumescent paint for structural steel, contact us with the specification for product and application advice.
Passive fire protection includes building materials and systems designed to restrict fire and heat without requiring manual activation.
Intumescent coatings form one part of a wider passive fire protection strategy.
Other passive fire protection measures can include:
The correct fire protection strategy should be established by the relevant competent designers and fire professionals for the project.
Our role is to apply the specified intumescent coating system correctly to the required structural elements.
Intumescent coating systems can often be finished with a compatible decorative topcoat where appearance is important.
Available colours depend on the selected coating manufacturer and approved topcoat system.
Common finishes can include:
Tell us your required finish when requesting a quotation so the appropriate topcoat can be included.
Our fire protection painting contractors provide intumescent coating application for commercial and industrial projects throughout Rawmarsh and South Yorkshire.
We can price directly from:
Providing this information allows us to assess the required coating system and produce a more accurate quotation.
There is no single standard thickness for intumescent paint.
The required dry film thickness depends on factors including the selected coating, steel section, section factor and required fire resistance period.
The manufacturer’s loading tables and project specification should be used to determine the correct thickness for each steel member.
A correctly specified and applied intumescent coating can provide passive fire protection to structural steel for the tested resistance period.
Its effectiveness depends on using the correct coating system, substrate preparation, primer, application thickness and environmental conditions.
The service life of an intumescent system depends on the product, environment, maintenance, exposure and condition of the coating.
Installed systems should be inspected when damage, corrosion or deterioration is suspected.
Contact us if you need an existing coating inspected or repaired.
A compatible topcoat can usually be applied over an intumescent coating where permitted by the coating manufacturer.
Compatibility is important because an unsuitable finish can affect the complete system.
Always confirm the approved primer, intumescent layer and topcoat combination before application.
Intumescent coatings react when exposed to elevated temperatures.
The exact activation characteristics depend on the individual product, so manufacturer technical data should be used rather than assuming one universal activation temperature.
Intumescent coating can be applied over existing paint, but the existing coating must first be assessed for condition and compatibility.
Applying an intumescent product over an unsuitable or poorly adhered coating can compromise the complete system.
Our team can inspect the substrate and advise whether preparation or removal is required before application.
Airless spray application is commonly used for intumescent coatings on larger structural steel projects because it enables efficient application and controlled coating build.
Brushes and rollers may also be used for smaller areas, repairs and locations with restricted access.
Need intumescent coating applied to structural steel in Rawmarsh?
Our contractors provide quotations for new installations, refurbishment projects and remedial coating works.
For the most accurate price, send us:
We can review the information and provide a quotation for the required works.
We provide intumescent painting and structural steel fire protection services throughout Yorkshire and the Humber, including Rawmarsh and surrounding areas.
Here are some towns we cover near Rawmarsh:
Rotherham, Wath upon Dearne, Mexborough, Wombwell, ConisbroughWe absolutely love the service provided. Their approach is really friendly but professional. We went out to five different companies and found Intumescent Painting Contractors to be value for money and their service was by far the best. Thank you for your really awesome work, we will definitely be returning!
Alexander LoweWe have used Intumescent Painting Contractors for many years as they are certainly the best in the UK. The attention to detail and professional setup is what make this company our go-to company for all our work. I highly recommend the team for the immense work - we highly recommend them!
Ben RichardsFor more information about intumescent painting in Rawmarsh, complete the contact form below to request a free quotation for your project.
We Aim To Reply To All Enquiries With-in 24-Hours